- The Phantom Flex introduces new degrees of flexibility not available on any other digital cinema camera. And, it goes beyond HD and supports 4 megapixel imaging when the ultimate in image resolution is required.
|
- 6 Gpx/second
- Max speed at full resolution of 2560 x 1600 is 1619 fps in Standard mode and 803 fps in HQ mode
- At 1920 x 1080, max speed is 2570 fps in Standard mode and 1275 fps in HQ mode
- Record direct to CineMag at up to 361 fps/second
|
- 2560 x 1600 pixels
- 10 µm pixel size
- 25.6 mm x 16.0 mm
- 12-bit depth
- ISO 1200 color
- TE cooled
- CAR in 256 x 8 increments
- Fill factor: 70%
- Dynamic range: 55 dB
- Read out noise at 45°C: 21e
- QE at 530nm: 57%
- Full well capacity: 11500e
|
- 1 µs minimum exposure in Standard mode
- Exposure range in HQ mode is dependent upon frame rate
- Global electronic shutter
|
- 16 GB high-speed internal RAM
- CineMag for non-volatile storage (128 GB, 256 GB, 512 GB)
|
- 5.0 seconds at 1000 fps, 12-bit depth, 1920 x 1080 resolution and into 16 GB of internal memory (Standard mode), 2.5 seconds in HQ mode
|
- Dual shooting modes:
- Standard mode for highest frame rates
- HQ mode for ultimate image quality
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Frame rate profile
- Frame timestamp
- IRIG in/out (modulated and unmodulated)
- SMPTE in/out
- Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Secondary IP address
- Field-based firmware upgrade capable
- Mounting plates for optional gear on side and handle
|
- Programmable trigger location (pre/post trigger recording)
- Trigger from software
- Hardware trigger BNC
- Trigger inputs also available on Aux ports
|
- 20 ns timing accuracy
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out (modulated or unmodulated)
- Ready output
- Strobe output
|
- Dual-link HD-SDI
- Genlock BNC
- FSYNC BNC
- Trigger BNC
- Timecode In BNC
- Timecode Out BNC
- Remote (RCU) port
- Viewfinder port with 1.5A power tap
- Two 12VDC (1.5A) Aux ports (with trigger signal available), total current available from the VF and AUX ports is 4A
|
- Gb Ethernet for both control and data
|
- Phantom Camera Control (PCC)
- On-Camera Controls
- Remote Control Unit (RCU), connects direct to camera
- Phantom Application (legacy)
- SDK available
|
- Dual-link HD-SDI
- Component viewfinder port
|
- PL-mount standard
- Nikon F-mount optional
- Canon EOS optional
- Canon FD optional
- B4 lens support through the use of an adapter (optional)
|
- Brightness
- Contrast
- Gamma
- Saturation
- Hue
- White Balance
- Sensitivity
- Image flip and rotate
- Apply filters
|
- Cine, Cine Compressed, Cine RAW, AVI, Multipage TIFF, MXF PAL, MXF NTSC, QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
- 100 - 240 VAC, 150 Watt power supply included
- 20-36 VDC battery input
- Two power connectors for hot-swapping battery power or having battery backup when on AC power
|
- Size (without lens, CineMag or handle): 11.5 x 5.5 x 5.0 inches (L x W x H); 29.2 x 14 x 12.7 cm
- Weight (without lens or CineMag): 11.75 lb; 5.33 kg
|
- Temperature: 0°C - 40°C
- Humidity: 80% non-condensing at 5°C
|
|
- 256 GB CineMag
- CineStation
- Custom build remote control
|